Blog

Three different materials, three different methods 'Gold piercing jewellery' is not a single material. In a typical jewellery collection, gold-toned pieces fall into three categories that look similar visually but are structurally very different: •         Solid gold (14k, 18k, 22k) — alloy of gold and other metals throughout the entire piece •         Gold PVD on titanium implant-grade titanium with an atomic-level vapour-deposited gold coating •         Vermeil sterling silver base with a thick layer (typically 2.5+ microns) of solid gold electroplated onto it All three look like gold. All three need different cleaning. Using a 'one method fits all' approach guarantees...

Titanium is forgiving but not indestructible Implant-grade titanium ASTM F136 is one of the most durable materials used in piercing jewellery. It doesn't tarnish, doesn't oxidise visibly, doesn't corrode under normal conditions, and resists most chemicals. This forgiving nature has produced a common misconception: that titanium piercing jewellery is essentially indestructible and can be cleaned however you like. It cannot. Several cleaning practices that work fine for stainless steel or fine gold actively damage titanium pieces. This guide covers what genuinely works for cleaning titanium, what damages it, and the practical routine that keeps quality titanium pieces in excellent condition...

The decision you wish you'd waited on There's a particular kind of regret that piercing wearers describe: the realisation, sometimes weeks or months or years after closing a piercing, that the closure was a mistake. The piercing that didn't fit your circumstances at the time has come around to fitting them again. The job you closed the piercing for has ended. The relationship has changed. The phase has passed. And the piercing you let go of is gone, replaced by a faint scar. Closure regret is common enough to deserve its own discussion. This guide covers why it happens, which...

Caught it in time The most common version of this scenario: you took your jewellery out for a few days for a job interview, a sports match, an MRI, a flight, or just because you forgot to put it back in and now when you try to reinsert it, the channel feels too tight. The post won't go through. The piercing isn't fully closed but it's not passable either. You're caught in the in-between zone where the original piercing might be recoverable or might be effectively gone. This guide is for that moment. It covers how to assess what state...